Description
RAVENOL REP Racing Extra Performance SAE 5W-30 is a modern, fully synthetic, fuel-saving, low friction multigrade engine oil. This oil is not only impressive as a result of its low sulphate ash content; it also has reduced HTHS viscosity for measurable fuel savings.
RAVENOL REP Racing Extra Performance SAE 5W-30 therefore contributes to reducing emissions and protecting the environment. It is extremely well-suited to modern petrol engines for car racing, even when subject to the highest levels of strain.
As a result of its special additives using tungsten, RAVENOL REP Racing Extra Performance SAE 5W-30 is also suitable for extremely sporty driving styles. It provides a safe layer of lubrication, even at very high operating temperatures. RAVENOL REP Racing Extra Performance SAE 5W-30 utilizes the positive properties of tungsten to smooth the surface structure of the motor, reducing friction and wear, and significantly improving mechanical efficiency. Extensive protection against corrosion (oxidation) and foaming.
Technical Characteristics and Features:
- Ultra-modern fully synthetic engine oil for car race with special tungsten additivation
- Fuel saving regarding partial load operation and full power operation
- Very low evaporation tendency
- Very stable and excellent viscosity behaviour
- Very good cold start characteristics
- Safe lubricating layer at very high operating temperatures
- Very good detergent and dispersant characteristics
- Good protection against corrosion and foam formation
Application Notes:
RAVENOL REP Racing Extra Performance SAE 5W-30 can be used as special oil for car race even under most difficult conditions.
Oil Specifications and Quality Standards:
- API SN
- ACEA C3
Formal Factory Approvals:
- MB-Approval 229.51
- MB-Approval 229.52
- GM dexos2™
- Renault RN0700/RN0710
- License: API SN
Practiced and tested in accordance with the following fills:
- Mercedes-Benz MB 226.5
- BMW Longlife-04
- Race Partnerships: Nürburgring Tested, Hockenheim Premium Partner
- Recommendation of Ralf Schumacher
| CHARACTERISTICS | UNIT | DATA | AUDIT |
|---|---|---|---|
| Density at 20°C | kg/m³ | 848.0 | DIN 51 757 |
| Color | – | brown | visual |
| Viscosity at 100°C | mm²/s | 12.2 | DIN 51 562 |
| Viscosity at 40°C | mm²/s | 73.4 | DIN 51 562 |
| Viscosity index VI | – | 165 | DIN ISO 2909 |
| HTHS at 150°C | mPа*s | 3.7 | CEC-L-36-A-90 |
| CCS Viscosity at -30°C | mPa*s | 4301 | ASTM D5293 |
| Low Temp. Pumping viscosity (MRV) | mPa*s | 14.870 | ASTM D 4684 |
| Pourpoint | °C | -60 | DIN ISO 3016 |
| Noack Volatility | % | 6.2 | ASTM D5800/b |
| Flash point (COC) | °C | 244 | DIN ISO 2592 |
| TBN | mg KOH/g | 8.1 | ASTM D2896 |
| Sulphated ash | %wt. | 0.8 | DIN 51 575 |
All indicated data are approximate values and are subject to the commercial fluctuations.
English 
Español 